Product Specifications Quayside Conservatories

Product Specifications

For All Your Orangeries, Conservatories, Lantern Roofs, Garden Rooms and Windows & Doors

JOINERY: All joinery is constructed from selected "engineered" Red Grandis and non-engineered Meranti hardwoods. These timbers are used for a combination of strength and durability. All timbers are sourced from certified sources of managed forests in compliance with EU Timber Regulation. The timbers are kiln dried to a moisture content of 12-14%. The joinery is spray with a microporous water bourne system to give a high build uniform paint finish in the clients choice of colourway.

FACE FRAME DESIGNS: An infinite number and variety of designs and sizes are available (subject only to structural considerations).

VERTICAL GLAZING: Toughened glass sealed units (4:20:4) are supplied for every vertical frame section. These units are sealed into the frames using the full perimeter bonded, neutral-cure silicone (wet) glazing method on-site.

ROOF GLAZING: Either safety glass (4:16:4 units) or triple wall polycarbonate sheets may be specified for roof glazing. Our own glazing system ensures a leak free roof when properly installed.

WINDOW VENTILATION: All opening windows are of a high performance specification, conventionally hung on stainless steel friction hinges, fully draught proofed and fitted with espagneolette locks & brassised handles.

ROOF VENTILATION: This may be achieved using thermally broken powdercoated, aluminium roof vents, which can either be manually or electrically operated.

EXTERNAL ACCESS: Single or double doors are available (with toughened 4:12:4 double glazed units) and open either inward or outward. All door systems are fully weather proofed, fitted with brass door handles, multipoint security locks & locking shoot bolts (where necessary).

FINISH: Translucent versions: 1x base coat stain, 2x top coats (Oak, Afromosia, Chestnut and Walnut shades). Opaque versions: 1x base coat stain, 1x high build primer, 1x top coat (a multitude of colours). Both versions are factory sprayed using microporous cross linked lacquer to achieve a low maintenance surface.

TECHNICAL ADVISE: Full technical support and advise may be called for and will always be provided in an easily understood form.

MANUFACTURE TIMES: Normally 6 - 8 weeks from cleared order, however this can fluctuate throughout the year according to demand.

Note: This general specification has been kept brief, please contact our sales office if you require more detailed information.